-
Bigeer
-
PVC Electric Rolling Pool Cover
-
Customized
-
Customized
-
Customized
-
300W
-
1 unit
-
45 days
Make covering your pool part of an easier daily routine. The BIGEER PVC Electric Rolling Cover combines a PVC slatted cover with electric operation to reduce manual handling when opening and closing a compatible pool or swim spa.
The system has a specified power of 300W, a 220V / 50Hz input supply, and an average cover travel speed of 8 m/min. Its rolling design brings the cover across the pool opening when closed and retracts it for swimming.
Whether you are planning a new installation or upgrading an existing pool area, start with your pool dimensions and installation layout to confirm a suitable cover configuration.
Request a Quote
Electric Operation with an Average Travel Speed of 8 m/min
Help Keep Leaves and Debris Out
When closed, the PVC slatted cover provides a barrier over the pool opening, helping limit the leaves and airborne debris that enter the water between swimming sessions. Remove accumulated debris before opening the cover to help keep it out of the pool.
Support Water and Heat Conservation
Keeping a pool covered when it is not in use can help reduce evaporation and the heat lost with it. The results depend on the cover's fit, the surrounding climate, water temperature and how consistently the cover is used.
Continue your normal filtration, water treatment and heating routine while using the rolling cover.
Keep the Pool Opening Neatly Covered
PVC Electric Rolling Cover Technical Specifications
| Specification | Details |
| Product | BIGEER PVC Electric Rolling Cover |
| Cover material | PVC |
| Cover format | Slatted rolling cover |
| Operation | Electric |
| Input voltage and frequency | 220V / 50Hz |
| Specified power | 300W |
| Operating voltage | 220V |
| Motor speed | 7 r/min |
| Average cover travel speed | 8 m/min |
| Specification | Details |
| Product | BIGEER PVC Electric Rolling Cover |
| Cover material | PVC |
Pool Compatibility and Installation Planning
A suitable installation starts with the pool opening and the space around it. For a swimming pool or swim spa, the cover must be matched to the dimensions, edge details, travel path and available storage space.
Prepare the following information for a project review:
Pool or swim spa model, if available.
Clear opening length and width.
Photos or drawings showing the pool rim and surrounding deck.
Locations of steps, ladders, handrails or other obstructions.
Available space for the rolling mechanism and retracted cover.
Installation location and available electrical supply.
Cleaning and Routine Maintenance
No experience required. The agent will guide you in every step.
A simple care routine helps keep the cover and its movement path clear.
-
What is a PVC electric rolling pool cover?
It is a pool cover that uses PVC slats and an electric drive to cover and uncover the pool opening. BIGEER's listed configuration uses a 220V / 50Hz input supply, with 300W specified power and an average travel speed of 8 m/min.
-
Can it be installed on an existing swim spa?
An existing swim spa can be assessed for compatibility. Send BIGEER the model, opening dimensions and photos of the surrounding area so the cover travel, mounting space and retraction clearance can be reviewed.
-
How is a PVC slatted cover different from a soft membrane cover?
A PVC slatted cover uses connected slat sections, while a soft membrane cover uses a flexible sheet. Their construction and installation requirements differ. Choose according to your pool layout, preferred operation and project requirements.
-
How long does the cover take to open?
Opening time depends on the travel distance and installation. The published average travel speed is 8 m/min; it is not a fixed opening time for every pool size.
-
Can I walk on the cover?
Do not walk, stand or place furniture on the cover. Use it as a pool covering system and follow the operating instructions for the supplied configuration.
-
What information is needed for a quotation?
Provide the pool or swim spa dimensions, installation photos or drawings, project location and quantity required. Include any specific requirements for controls, appearance or installation so they can be reviewed with the quotation.
Request a Quote for Your PVC Electric Rolling Cover
Plan a more convenient way to cover your pool or swim spa with BIGEER. Share your dimensions and site details to discuss compatibility, installation requirements and the proposed cover configuration.